– E-13 –
[Temporary memories (A-F, X and Y)]
Press O and a corresponding variable key to store a value
in memory.
Press R and a corresponding variable key to recall a
value from the memory.
To place a variable in an equation, press K, followed by a
desired variable key.
[Independent memory (M)]
In addition to all the features of temporary memories, a value
can be added to or subtracted from an existing memory value.
Press ªOM to clear the independent memory (M).
[Last answer memory (ANS)]
The calculation result obtained by pressing = or any other
calculation ending instruction is automatically stored in the
last answer memory.
Note:
• Calculation results from the functions indicated below are
automatically stored in memories X or Y. For this reason,
when using these functions, be careful with the use of
memories X and Y.
• Random function ................. Y memory
• →rθ, →xy ................................ X memory (r or x),
Y memory (θ or y)
• Temporary memories and last answer memory are cleared
even when the same mode is reselected.
• Use of R or K will recall the value stored in memory
using up to 14 digits.
ª 8 * 2 OM
16.
24÷(8×2)= 24 /KM=
1.5
(8×2)×5= KM* 5 =
80.
ª 56 OA
56.
B=68
A=56
68 OB
68.
A÷2+B×4= KA/ 2 +
KB* 4 =
300.
ªOM
0.
$150×3:M
1
150 * 3 ;
450.
+)$250:M
2
=M
1
+250 250 ;
250.
–)M
2
×5% R M * 5 @ %
35.
M @:RM
665.
509E_en0610.p65 04.6.10, 2:52 PM13
To Next Page
Loading...
