Sharp ER-A250 - IN CASE OF POWER FAILURE OR PAPER JAM

arffi,
This function allows
you
to
disable
any of
the cash register functions listed below.
Function A: Split
pricing quantity
count
method
Value to enter:
1 for
package
or 0
for
quantity
Function
B:
Split
price
entry
Value to enter:
.1
to disable or 0
to enable
Function
C:
Direct void after
first item
registered only
Value to enter: 1 to disable or 0
to enable
Function
D:
lndirect
void in the REG
mode
Value to enter: 1 to disable or 0
to enable
Function
E:
Subtotalvoid
in the REG
mode
Value to enter: 1 to
disable
or 0 to enable
Function F: Tax delete
Value to
enter:
1
to disable
or
0
to enable
Function
G:
Manualtax
Value to enter: 1 to disable or 0 to enable
Function H: Decimal digit entry
Value to enter: 1 to disable or 0 to enable
.. . ^\)
.
The
settings to disable
functions
A
to G are
valid
only in the REG mode.
Note-
Use
the following
sequence to set
the limit.
tg+t l
---f
td
---|
@/FoR'l
+
A, B,
C,
D, E, F, G, and
H
+
EFil
+
Iir/AINsl
- - r-?
.
When entering function
limits A to H,
any
leading
zeros in the sequence
must
be
Note'-
omitted.
the Machine
Setti
tr6r
To obtain a
printout
that shows the cash register
settings made in
this chapter, do the
following.
1. a) To see the complete PLU settings:
Press
liLtllulel.
b) To see a range of PLU settings:
Use
the following
sequence:
Start no.
(1
to 100)
+
{@/Foil
*
End no.
(1
to 100)
---}
ltau/ngl
Example: Disable the indirect void
function and manual tax
function.
00010010
J_l
EJ _sl
j
g
ss{l
43
www.cashregisters.net