ER-A410/ER-A420 PROGRAM (PGM2/PGM1) MODE
2 – 15
[JOB#2321]
MEDIA KEY FUNCTION PROGRAM (AMOUNT HALO)
[JOB#2330]
FUNCTIONAL PROGRAMMING FOR EXCHANGE KEYS
MRS = 2 (Same as SRV#902_D)
[JOB#2334]
CURRENCY SYMBOL PROGRAMMING FOR EXCHANGE KEYS
Character can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys is
as follows:
MRS = “space”
This symbol is printed with (+) amount of foreign currency. The pro-
grammed characters is printed at left side of amout.
Ex) Case of “DM”:
If some space characters are programmed at the left side of symbol
(like “ *”), they are not counted as the number of character of the cur-
rency symbol. (In case of “ DM”, the number of character is 2.)
[JOB#1400]
CLERK CODE DIFINITION
XXX: Function No.
YYYYYYYYY: Limitation amount
Func. No. Function Entry range MRS
49 CA/CHK 0 to 99999999 99999999
74 CID (Sentinel) 0 to 999999999 999999999
77 CHK CHANGE 0 to 99999999 99999999
XXX: Function No.
Function No. Function
62 Exchange 1
63 Exchange 2
64 Exchange 3
65 Exchange 4
A: TAB A
0 0
0.0 1
0.00 2
0.000 3
2321 XXX
YYYYYYYY
0
ST TL
2330 XXX A
0
ST TL
XXX: Function No.
Function No. Function Range
62 Exchange 1
4 characters
63 Exchange 2
64 Exchange 3
65 Exchange 4
XXX 3 00 KEY XXX: Character code (3 digits)
EXCH1 1.234567
DM1.23
Programmed symbol
Ex) Case of “ DM”: (The currency symbol means “DM”)
XX: Clerk No.= 1~20
YYYY: Clerk code = 1~9999
MRS = No record
(It is set same code as clerk No. when a clerk file is created.)
2334 XXX Character key
No change
ST TL
Function No.
1400 XX YYYY
ST TL
To Next Page
Loading...
