ER-A410/ER-A420 PROGRAM (PGM2/PGM1) MODE
2 – 16
[JOB#1414]
CLERK NAME PROGRAMMING
Characters can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys is
as follows:
Max. 12 characters
[JOB#1500]
CASHIER CODE DEFINITION
MRS = Same code as cashier No.
[JOB#1514]
CASHIER NAME PROGRAMMING
Characters can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys is
as follows:
Please refer to section 4.
Max. 12 characters
MRS = ‘Space’
[JOB#2510]
CASHIER PROGRAMMING
MRS = 0001
[JOB#2511]
CASHIER TABLE NO. (PBLU) LINK
MRS = 1-9999
[JOB#2610]
DATE SETTING
The date entry format complies with the applicable SRV-mode
(SRV#912_A) programming.
YYYY: Clerk code = 1~9999
XXX 3 00 KEY XXX: Character code (3 digits)
MRS = No record
(It is set all space when a clerk file is created.)
XX: Cashier No.= 1~20
YY: Cashier code = 1~9999
YYYY: Cashier code = 1~9999
XXX 3 00 KEY XXX: Character code (3 digits)
1414 YYYY Character key
No change
ST TL
1500 XX YYYY
0
ST TL
1514 YYYY Character key
TLST
No change
YYYY: Cashier code = 1~9999
A: G.C. copy A
Enable 0
Disable 1
B: VAT shift B
Not 0
State 1
C: PRICE LEVEL C
Price 1 0
Price 2 1
D: Drawer No. D
Not open 0
Drawer 1 1
Drawer 2 2
YYYY: Casher code (01 to 9999)
XXXX: Start code (1 to 9999)
ZZZZ: End code (1 to 9999)
XXXXXXXX: YYYYMMDD or DDMMYYYY or MMDDYYYY
(YYYY: 2000~2099)
(MM: 01~12)
(DD: 01~31)
MRS = 01/01/2000
(DDMMYYYY)
2510 YYYY ABCD
0
ST TL
2511
YYYY
TLSBTL
XXXX ZZZZ
Start = End
0 (Start = End = 0000 : PBLU Entry is inhibit)
2610 XXXXXXXX TL
To Next Page
Loading...
