ER-A410/ER-A420 PROGRAM (PGM2/PGM1) MODE
2 – 17
[JOB#2611]
TIME SETTING
The date entry does not complies with SRV#912_B.
MRS = 00:00
[JOB#2612]
MACHINE NUMBER SETTING
MRS = 000000
[JOB#2613]
CONSECUTIVE NUMBER SETTING
MRS = 0000
[JOB#2614]
LOGO TEXT PROGRAMMING
(1 Block max. 24 char.)
Character can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys is
as follows:
Note: This programming is related to JOB# 912D programming.
The programable line has below relations with each key word at
JOB# 912D.
[JOB#2615]
Programming of the No. of times of validation printing and feed line after
printing Differ ST.
MRS = 009910
[JOB#2616]
OPTIONAL FEATURE
XX: Hour (00~23)
YY: Minute (00~59)
XXXXXX: Machine number (0~999999)
XXXX: Consecutive number (0000~9999)
X: 1~6: 1 (24 char.)
2 (24 char.)
3 (24 char.)
4 (24 char.)
5 (24 char.)
6 (24 char.)
XXX 3 00 Key XXX: Character code (3 digits)
0
2611 XXYY
TL
0
2612
XXXXXX TL
0
2613 XXXX
TL
2614 Character key
X
Position code
No change
ST TL
(ER-A410)
Default =
(ER-A420)
“6-line header”: All 6 lines are programmable.
“3-line header”: Upper 3 lines (1st-3rd line) are pro-
grammable.
“3-line footer”: Lower 3 lines (4th-6th line) are pro-
grammable.
“Graphical LOGO only”: No line is programmable.
VV: INITIAL SLIP FEED LINE = 0 to 64
XX: SLIP PRINT MAX LINE NO. = 0 to 99
A: No. of times of validation printing = 0 to 9
B: Feed line after despression of differ subtotal key = 0 to 9
XX: 1 MRS = 00000000
A: OP X/Z report A
Enable 0
Disable 1
B: PO operation in REG mode B
Enable 0
Disable 1
C: Not used (Fixed at "0")
D: "RFND" key entry in REG mode D
Enable 0
Disable 1
E: Direct void function in REG mode E
Enable 0
Disable 1
F: Indirect void in REG mode F
Enable 0
Disable 1
0
2615 VVXXAB TL
2616 ABCDEFGH
0
XX
ST TL
To Next Page
Loading...
