No Procedure on P.C. side No Procedure on ER-A450T side
6 Entry of JOB#996 in the SRV mode
ER-A450T shows
7 Communication starts.
8 UpLoad is completed.
The initial Window is shown.
"Push "Exit" Button."
8 UpLoad is completed.
9 ALL RAM Data Download ( PC -> ER-A450T ) 9 Place the SRV key in the SRV mode.
10 Execute "02FD.EXE" on P.C
*Don’ t execute the other Software at the same time.
11 Set the Communication method by "Setting" Button. 12 Entry of JOB#998 in the SRV mode
ER-A450T shows
Push "OK" Button.
13 Push "PC -> POS" Button.
And Select the Receiving File.
14 Communication starts.
15 Download is completed.
The initial Window is shown.
Push "Exit" Button.
15 Download is completed.
16 Execute "Service Reseth" on ER-A450T
996 CA/AT
@/FOR
00000
998 CA/AT
@/FOR
00000
6 – 5
To Next Page
Loading...
