[JOB#927] MRS = 0000
#927-A: 1. Rounding up of the units digit of amount
#927-B: 1. Rounding down of the units digit of amount
1. Rounding the units digit of amount 927-AB
Common destination 00 ★
Netherland/Switzerland 82
Norway 54
#927-C: 1. Difference memory (Difference between before-
rounding and after-rounding)
2. Limit on the least sighificant digit in entering the amount
on item
1. Difference memory 2. Limit on the least
sighificant digit in
entering the amount
on item
927-C
No
Arbitary 0 ★
0 only 1
0 and 5 only 2
Yes
Arbitary 4
0 only 5
0 and 5 only 6
#927-D: 1. Application of rounding
2. Limit on the least significant digit in entering the amount
of payment
1. Application of rounding 2. Limit on the least
significant digit in
entering the amount
of payment
927-D
Item & Payment
Arbitary 0 ★
0 only 1
0 and 5 only 2
Payment
Arbitary 4
0 only 5
0 and 5 only 6
[JOB#928] NOT USED: MRS = 0000
[JOB#929] NOT USED: MRS = 0000
[JOB#980] MRS = 0000
#918-A, B, C: Not used (Fixed at "000")
#980-D: 1. Language selection of guidance message
1. Language selection of guidance
message
910-D
English 0 ★
German 1
[JOB#930∼939] MRS = 0000
RESET REPORT COUNTER
JOB # Function
930 Z1 report counter
933 Hourly Z1 report counter
934 PLU Z1/Z2 report counter
935 Cashier Z1/Z2 report counter
937 Z2 report counter
939 31 day daily net Z2 report counter
[JOB#942, 943] MRS = 0000000000000
GT COUNTER PRESETTING
JOB # Function
942 GT2 (Positive GT)
943 GT3 (Negative GT)
Note: GT1 is obtained by calculation
Equation: GT1=GT2-GT3
[JOB#944] MRS = 0000
PGM1/2 secret code presetting
NOTE: When the secret code "0" is programmed, the secret code
entry is be inhibited.
[JOB#945] MRS = 0000
The assignment of RS232 channel by each devices
* For use, the option control ROM (ER-A46R1) and the RS232 I/F
(ER-A5RS) are required.
#945-A: 1. Channel No. for online
1. Channel No. for online 945-A
Channel No. 0 to 7
#945-B, C, D: Not used (Fixed at "000")
* 0 = No connect
1 to 7 = Channel number
[JOB#946] NOT USED: MRS = 0000
[JOB#948] MRS = 000000
PROGRAMMING OF TRAINING CASHIER NO.
[JOB#949] MRS = "TRAINING"
THE TRAINING MODE’S TITLE
Characters can be entered by using alphabetic keys or numeric keys.
Please refer to section 3.
[JOB#989]
RESETTING OF ALL COUNTER AND TOTALIZER
Job#
ABCD
Initial value of Z countr
"0000"
TL