Note:
Certain models only
have 4 shipping bolts.
11
Installation
Removing the shipping bolts
Before using the washing machine, you must remove all shipping bolts from the back
of the washing machine. To remove the shipping bolts:
Loosen all shipping bolts with the spanner.
Take each bolt head and pull it out from
the hole. Repeat the same process for all
shipping bolts.
Fill the holes with the supplied bolt caps.
Keep the shipping bolts for future use.
● Packing materials can be dangerous to children; keep all packing
materials (plastic bags,foamed plastic,shipping bolts,etc.) well out of
the reach of children.
● Do not cut off the fixing belt of the drain hose.
● Do not remove the screw fixing the belt of the drain hose.
WARNING
Fixing belt
Shipping bolt
To Next Page
Loading...
