EN -21-
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
The door of your machine is left
open.
Close the machine door. If your
machine persists to indicate
fault, turn off your machine,
unplug it and contact the nearest
authorised service immediately.
The water pressure or the water
level inside the machine is low.
Turn on the faucet. Mains water
may be cut-off. If the problem
still continues, your machine will
stop after a while automatically.
Unplug the machine, turn off your
faucet and contact the nearest
authorised service.
The pump is faulty or pump lter is
clogged or electrical connection of
the pump is faulty.
Clean the pump lter. If the
problem persists, contact the
nearest authorised service. (*)
Your machine has excessive
amount of water.
Your machine will discharge water
by itself. Pursuant to discharging
operation, turn off your machine
and unplug it. Turn off your
faucet and contact the nearest
authorised service.
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Water cut-off or low mains water
pressure.
- Water faucet may be closed.
Check.
- Mains water may be cut-off.
Check.
- If so, switch the programme knob
to position 0. You can select a
programme and run your machine
after the mains water is supplied.
- Mains water pressure may be
low. Check.
- Water inlet hose may be twisted.
Check.
- Water inlet hose may be
clogged.
- Clean water inlet hose lters. (*)
- Valve inlet lter may be clogged.
- Clean the valve inlet lters. (*)
If the problem persists, unplug
your machine, turn off your
faucet and contact the nearest
authorised service.
Pump is faulty or pump lter is
clogged or electrical connection of
the pump is faulty.
- Pump lter may be clogged.
Clean the pump lter. (*)
- Discharging hose may be
clogged or twisted. Check the
discharging hose.
If the problem persists, contact the
nearest authorised service. (*)
DISPOSAL OF YOUR OLD MACHINE
This symbol on the product or package implies that the product should not be treated as domestic waste.
Instead, it should be delivered to applicable waste collection places recycling electrical and electronic
equipment. You will contribute to avoid potential negative results regarding environment and human health,
which will arise due to wrong waste procedure for the product by ensuring that this product is annihilated
properly. Recycling materials will help natural resources be preserved. For more detailed information regarding
recycling of this product, please contact local municipality, domestic waste annihilation service or the shop you
have purchased the product.
CHAPTER -11: AUTOMATIC FAULT WARNINGS AND
WHAT TO BE DONE
E01
E02
E03
E04
To Next Page
Loading...
