EN -7-
• Use your machine only for laundries that have been specied as suitable
for washing by the manufacturer.
• Before operating the washing machine, remove the 4 transportation
screws and rubber spacers from the back of the machine. If the screws are
not removed, it may cause heavy vibration, noise and product malfunction,
(voiding the guarantee).
• Your machine is not covered under warranty for faults caused by any kind
of external factors (pesticides, re, etc.).
• Please do not throw away this user manual; keep it for future reference.
You or somebody else might need it in the future.
Note: Machinery specications may vary depending on the product
purchased.
REMOVAL OF PACKAGING MATERIALS
Packaging materials protect your machine from any damage that might
occur during transportation. Packaging materials are environment friendly
as they are recyclable.
Recycling material provides both raw material savings and decreases
waste production.
CHAPTER-2: OVERVIEW OF YOUR DEVICE TECHNICAL
SPECIFICATIONS
Operating voltage / frequency (V/Hz) (220-240) V~/50Hz
Total current (A) 10
Water pressure (Mpa) Maximum: 1 Mpa /
Minimum : 0.1 Mpa
Total power (W) 1850
Maximum dry laundry capacity (kg) 6
Spinning revolution (rev / min) 1200
Programme number 15
Dimensions (Height x Width x Depth) (mm) 845 x 597 x 416
CHAPTER -1: BEFORE USING THE APPLIANCE
To Next Page
Loading...
