EasyManuals Logo

Sharp ES-NFB814BSMA-EN User Manual

Sharp ES-NFB814BSMA-EN
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
EN - 18
programme.
Toselectthisfunction,presstheRapid
wash button when the symbolis
displayed.
NOTE: If you put less than
halfthemaximumloadoflaundryinto
yourmachinethehalf-loadfunctionwill
beautomaticallyset,regardlessofthe
programmeyouselected.Thismeans
thattheselectedprogrammewilltakeless
timetocompleteandwilluselesswater
andenergy.Whenyourmachinedetects
half load, the symbolisdisplayed
automatically.
10. No Spin(*)
Auxiliaryfunctionbutton4 or 5 NoSpin
If you don’t want to perform wringing on
your laundry, you can use this auxiliary
function. You may make the programme
active by pressing the wringing cancel
button on the display panel when the led
light of the symbol turns on.
11. Cold Wash(*)
Auxiliaryfunctionbutton4 or 5 Cold Wash
Youcanusethisauxiliaryfunctionwhen
youwanttowashyourlaundrywithcold
water (tap water). You may make the
programmeactivebypressingthecold
washingbuttononthedisplaypanelwhen
theledlightofthe symbol turns on.
(*)Machineryspecificationsmayvary
dependingontheproductpurchased.
Start/Pause button
BypressingontheStart/Pausebutton,
you may start the programme you
haveselectedorsuspendarunning
programme.Ifyouswitchyourmachineto
the standby mode, the Start/Pause led on
theelectronicdisplaywillblink.
5.8 Child Lock
The Child Lock function allows you to
lock the buttons so that the wash cycle
you have chosen cannot be changed
unintentionally.
To activate child lock, press and hold
button 4 and 5 simultaneously for at
least 3 seconds. ‘’CL’’ will flash on the
electronic display for 2 seconds when the
child lock is activated.
If any button is pressed or selected
programme is changed by the programme
dial while the child lock is active, the “CL”
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and
a programme is running, when the
programme dial is turned to the CANCEL
position and another programme
is selected the previously selected
programme continues from where it was
left.
To deactivate the child lock, press and
hold button 4 and 5 simultaneously for at
least 3 seconds until the “CL” symbol on
the electronic display disappears.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp ES-NFB814BSMA-EN and is the answer not in the manual?

Sharp ES-NFB814BSMA-EN Specifications

General IconGeneral
BrandSharp
ModelES-NFB814BSMA-EN
CategoryWasher
LanguageEnglish

Related product manuals