Administrator Password
30
• If password protection is enabled, a password entry screen will appear after
you press . Continue to press the above keys without entering the
password.
2 Press to select PASSWORD
PROTECT.
3 Press to enable protection, or
to disable protection.
4 Press the numeric keys and/or the letter keys to enter the current
password.
5 When you have finished entering the password, press .
MENU
2
1
2
START/
ENTER
When password protection is enabled
When password protection enabled, you will be prompted to enter the
password each time you press to configure a MENU setting. Enter
the password with the numeric and/or letter keys as appropriate, press ,
and then continue as usual.
MENU
START/
ENTER
2:PASSWORD PROTECT
1=YES, 2=NO
ENTER PASSWORD
[ ]
To Next Page
Loading...
