Using an LDAP Server: Searching for Destinations and User Authorization
116
9 Complete the operation as follows:
• E-mail: Transmission will begin after 5 seconds. If you wish to enter a
message or change the sender name, sender e-mail address or file format,
press before 5 seconds elapes (before transmission begins), and
then perform steps 10 through 12. If you do not press , this completes
the operation.
• Fax: Transmission will begin immediately. This completes the operation.
• Broadcast transmission: You will return to Step 3 of the Broadcast
procedure on page 153. Select another destination in Step 3 or go on to
Step 4 of the Broadcast procedure.
10 If you pressed in Step 9 to
change e-mail options or enter a
message, the screen at right will
appear. Press to select the option
that you wish to change and then press
. Change the selected option as
follows:
• FROM
Enter your name, press , enter your e-mail address, and press .
• FILE FORMAT
Press to select the desired combination of file format (TIFF or PDF)
and compression (G3, G4 or NO COMPRESSION), and then press .
• MESSAGE
Use the letter entry keys to enter a message (maximum of 256 characters).
A line break can be entered by pressing . When finished, press .
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER
1:START SCANNING
2:FROM
XXX
3:FILE FORMAT
XXX
4:MESSAGE
NO MESSAGE
To Next Page
Loading...
