Sharp FO-DC535 - Page 213

Optional Settings
211
7. Optional
Settings
Setting 38: PRINT HOLD
Use this setting to turn on or turn off the Print Hold function (see page 189).
To turn on the Print Hold function, press or to select YES and then
press . (Note: A Print Hold code must be programmed before YES can
be selected.)
To turn off the Print Hold function, press or to select NO, press
, enter the 4-digit Print Hold code, and press . (Note: NO cannot
be selected if a received fax is being held in memory by the Print Hold
function. First print the fax and then turn off Print Hold.)
♦ Initial setting: NO
START/
ENTER
START/
ENTER
START/
ENTER