Sharp FO-DC535 - Page 57

Sending a Fax by Automatic Dialing
55
2. Send/Receive
Documents
Note: To directly print out a list of the jobs waiting in memory for transmission,
press ,
or to select REPORT PRINT, and then .
Canceling a memory transmission by number
If you know the memory number assigned to a memory transmission, you can
cancel it with the following procedure. (If you don’t know the memory number,
use the preceding procedure.)
MEM.STATUS
B
START/
ENTER
1 Press (flip up the Rapid Key
overlay) and then or until
MESSAGE CLEAR is selected in the
display.
2 Press .
3 Enter the 3-digit memory number of the job you wish to cancel.
4 Press .
MEM.STATUS
B
START/
ENTER
START/
ENTER
3 Press or to scroll through the list of jobs.
To cancel a job, press or to select the job, press , and
then press .
4 When you have finished checking the list, press twice to return to
the date and time display.
DEL
START/
ENTER
STOP
Display:
MEMORY STATUS REPORT
1:COPY STATUS
2:MEMORY TX STATUS
3:MEMORY RX STATUS
4:MESSAGE CLEAR