Sending an Image Using a Rapid Key
97
3. Network
Scanner
Storing an e-mail address in a Rapid Key or Speed Dial
number
This section explains how to store e-mail addresses in Rapid Key and Speed
Dial numbers using the operation panel of the machine. This will allow you to
send documents to e-mail recipients without having to manually enter the e-
mail address each time.
♦ This procedure cannot be used to store an FTP or Desktop destination
(these can only be stored as explained on page 85).
1 Press and then or
until ENTRY MODE is selected in the
display.
2 Press . Make sure that
DESTINATION SETTING is selected.
3 Press . Make sure that SET is
selected.
4 Press .
MENU
START/
ENTER
START/
ENTER
START/
ENTER
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
ENTRY MODE
01:DESTINATION SETTING
02:PASSCODE SETTING
03:OWN PASSCODE SET
DESTINATION SETTING
1=SET
2=CLEAR
DESTINATION SET
PRESS RAPID OR SPEED
To Next Page
Loading...
