13
FV-DB1E
04/4/12 FV-DB1E_2.fm
TINSEA025SJZZ
FM Operation
Listening to the FM
Notes:
"
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
"
Auto scan tuning will skip weak signal stations.
"
To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the BAND button to display the "ST" indicator.
"
" " will appear when an FM broadcast is in stereo.
"
If the FM reception is weak, press the BAND button to extinguish
the "ST" indicator. The reception changes to monaural, and the
sound becomes clearer.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the BAND button until "FM" ap-
pears on the display.
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for 2 seconds or more,
scanning will start automatically and the tuner will stop at the
first receivable broadcast station.
FM stereo mode indicator
FM stereo receiving indicator
4
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
