Sharp GF-777H - Page 6

EZ Removal of Mechanism Block
1. Remove three sockets at the mechanism P.W.B., two
sockets at the record/playback P.W.B. and one socket at the
bias current P.W.B. See Fig. 6-1 and 6-2.
2. Detach the tape counter drive belt from the tape take-up
reel disk. Remove four screws at the mechanism block, and
shift the mechanism block forwards and detach. See
Fig. 6-3.
Figure 6-1
Figure 6-2 Figure 6-3
= Removal of Tuner Frame
1.
Remove
one
socket
at
the
tuner
P.W.B.
See
Fig.
6-4.
2.
Loosen
three
tabs
securing
the
dial
scale
plate,
and
detach
the
plate
while
shifting
it
down.
See
Fig.
6-5.
3.
Remove
three
screws
at
the
tuner
frame,
and
detach
the
frame
while
shifting
it
to
right.
See
Fig.
6-6.
me
Wo
RARBERBAE
ao.
Amar
weeeeeter
ef
-
.
Wa
«
a
Figure 6-5
= Removal of Power Amplifier P.W.B.
1. Remove one screw and two tabs at the super woofer sound
control P.W.B., and one screw at the power amplifier
P.W.B. Then hold up the power amplifier P.W.B. to remove.
See Fig. 6-7.
Figure 6-7