EasyManuals Logo

Sharp GX-BT3 User Manual

Sharp GX-BT3
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
E-1
Accessories
The following accessories are included.
MUTE
ON/
STAND-BY
TREBLE
AUDIO IN
BASS
PAIRING
VOL
X-BASS
BLUETOOTH
DIMMER
RRMCGA343AW01
ECO MODE
GX-BT3
Remote control x 1
NFC tag x 2
Velcro tape
(hook type) x 2
Velcro tape
(loop type) x 3
Precautions
General
Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is a free
space along the sides, top and back of the equipment
as below.
30 cm (12”) 30 cm (12”) 10 cm (4”)
10 cm (4”)
Gap
Do not obstruct the gap when turning off the unit.
Use the unit on a firm, level surface free from vibration.
Place the unit at least 30 cm (12”) away from any CRT
TV to avoid colour variations across the TV screen. If
the variations persist, move the unit further away from
the TV. LED, plasma and LCD TV are not prone to such
variation.
Keep the unit away from direct sunlight, strong mag-
netic fields, excessive dust, humidity and electronic/
electrical equipment (home computers, facsimiles, etc.)
which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low tempera-
tures.
If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
The apparatus is designed for use in moderate climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may re-
sult in a fire or other type of accident causing damage.
SHARP will not be held responsible for any damage re-
sulting from use of this unit with a voltage other than that
which is specified.
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It
is advisable to avoid exposure to high volume levels. Do
not turn the volume on to full at switch on. Listen to music
at moderate levels.
Hereby, SHARP Electronics declares that this SHARP
Wireless Bluetooth Speaker System GX-BT3 is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. The declaration
of conformity may be consulted at:
http://www.sharp.de/doc/GX-BT3.pdf
WARNINGS
When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the
remote control.
Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority of the owner of the copyright. Please refer to
relevant law in your country.
This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Do not turn the volume on to full at switch on. Listen
to music at moderate levels.
Special Notes

Other manuals for Sharp GX-BT3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp GX-BT3 and is the answer not in the manual?

Sharp GX-BT3 Specifications

General IconGeneral
Speaker type2-way
Number of drivers2
Number of speakers1
Audio output channels2.1 channels
Subwoofer includedYes
Impedance- Ω
Frequency range- Hz
RMS rated power20 W
Speakers RMS power10 W
Connectivity technologyWired & Wireless
Product type2.1 portable speaker system
Product colorBlack
Product designSoundbar
Recommended usageUniversal
Power source typeAC
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (standby)0.4 W
Weight and Dimensions IconWeight and Dimensions
Depth172 mm
Width470 mm
Weight2280 g

Related product manuals