E-6
Bluetooth one touch connection via NFC
■ About NFC technology
Near Field Communication (NFC) is a set of standards for
devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together
or bringing them into close proximity.
Using NFC in this product simplifies the pairing method of
Bluetooth connectivity.
● This audio system supports NFC-enabled device with
Android 4.1, Jelly Bean and higher.
● For device with a lower Android version, refer the
operation manual of the device for recommended app
(application).
Unlike other wireless technology, NFC requires no
discovery or pairing.
Simply tap the source device to the NFC tag to instantly
enjoy seamless connectivity between your smart device
and the audio system.
■ NFC detection area
NFC detection area location may vary depending on the
device (smartphone/tablet). Refer operation manual of the
device for detail.
GX-BT3
NFC tag
(during Bluetooth Standby mode)
M
a
n
u
a
l
B
l
u
e
t
o
o
t
h
s
e
t
t
i
n
g
Switch ‘ON’
Bluetooth
Search/scan
A Bluetooth audio
source device
(smartphone/tablet).
Pairing
Connect
■ NFC tag set up
The NFC tags can be placed anywhere convenient to you.
The velcro tapes supplied will help to secure the tags onto
the desired location.
Caution:
● Make sure that the NFC tag is placed on a flat and
level surface.
● If you choose not to use the velcro tape, do not
place the NFC tag near metal surface to avoid
connection interference during tagging.
Important:
● NFC tag has unique ID for each individual set, SHARP
provides 2 identical tags for your convenience.
● SHARP will not be held liable for the damages caused
by rewriting the tags.
Keep all small parts away from children as they may
be accidentally swallowed.
1 Peel the separator off the velcro tape (loop type) and
stick it on a desired surface.
Separator
Velcro
tape
(loop type)
2 Peel the separator off the velcro tape (hook type) and
stick it to the rear of the NFC tag. Then place the tag
onto the desired location.
Separator
rear view of the NFC tag
Velcro tape
(hook type)
■ NFC connection for audio playback
Check that:
● Your device (smartphone/tablet) has an NFC function.
● NFC function on your device is enabled.
● Screen lock function of the device is off.
● This unit is not in Eco mode.
● Your device must be within 10 metres from the unit.
1 Touch your device to
the supplied NFC tag.
NFC tag
2 A pop-up window asking whether to proceed with
the Bluetooth connection appears on the device. Select
<YES>.
● The ‘connected’ message appears when the connec-
tion is complete.
3 Playback will start automatically, otherwise press play
(on remote control or source device).
● Sound will be heard from the speakers of this unit via
audio streaming.
● Your device must be within 10 metres from the unit.
Various Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Notes:
● To disconnect, simply touch your device to the tag
again.
● Regardless of which tag you used to establish Blue-
tooth connection with this product, tapping your device
to any of the NFC tags again, will disconnect the Blue-
tooth connection.
● To listen to audio via Bluetooth connectivity without NFC
tag - refer “Pairing with other Bluetooth source de-
vices” on page 7.
● It takes about 6-8 seconds for a Bluetooth enabled de-
vice (eg. smartphone) to establish Bluetooth connec-
tion with this unit via NFC or manual connection.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
