Sharp HT-SB106 User Manual

2
• Ensure that the unit is plugged into an AC 100-240V 50/60Hz power outlet. Using
higher voltage may cause the unit to malfunction or even  re catching.
• If the power plug does not  t into your outlet, do not force the plug into an electri-
cal socket if it does not  t.
• Turn o the unit before unplugging it from power source to completely switch it o .
• Do not disconnect or connect the power cord with wet hands. It may cause an
electric shock.
• Disconnect the power cord if it is not used for a long time.
• Ensure that the mains plug is always easily accessible.
• This product does not contain any parts that are serviceable by the user. In case
of a fault, contact the manufacturer or authorised service department. Exposing
the internal parts inside the device may endanger your life. The manufacturers
guarantee does not extend to faults caused by repairs carried out by unauthorised
third parties.
• Do not use this product immediately after unpacking. Wait until it warms up to
room temperature before using it.
• Ensure this product is used in moderate climates only (not in tropical/subtropical
climates).
• Place product on a  at, stable surface that is not subject to vibrations.
• Ensure the product and its parts is not overhanging the edge of the supporting
furniture.
• To reduce the risk of fire, electric shock or damage to this product, do not expose it
to direct sunlight, dust, rain and moisture. Never expose it to dripping or splashing
and do not place objects filled with liquids on or near the product.
• Do not place objects  lled with liquids, such as vases, on the apparatus.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampli ers) that produce heat.
• Do not place the product where the humidity is high and ventilation is poor.
• Ensure a minimum distance of 5 cm around the apparatus for su cient ventilation.
Do not block any ventilation openings of this product. Always ensure that the
ventilation openings are not covered with items such as newspapers, table-cloths,
curtains, etc.
• NEVER let anyone, especially children, push anything into holes, slots or any other
openings in the unit’s casing as this could result in a fatal electric shock.
• Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck
by lightning, the appliance might get damaged, even if it is turned o . You should
disconnect all the cables and connectors of the appliance before a storm.
• Excessive sound pressure from earphones and headphones can cause hearing loss.
Maintenance
• Unplug the power cable from the power source before cleaning the appliance.
• Use a soft and clean rag to clean the outside of the unit. Never clean it with chemi-
cals or detergent.
Power Adapter
• To disconnect the unit from the mains supply, unplug the lead from the mains
socket.

Sharp HT-SB106 Specifications

General

Number of speakers	-
Audio output channels	2.0 channels
Equalizer	Yes
RMS rated power	110 W
Wi-Fi	No
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Black
Product design	Soundbar
Volume control	Digital
Certification	CE (EMC), CB (Safety), ErP (Energy)
Recommended usage	Universal
Power source type	AC
AC adapter frequency	50 Hz
AC adapter input voltage	220 - 240 V
Power consumption (typical)	0.5 W

Weight and Dimensions

Depth	60 mm
Width	650 mm
Height	82 mm
Weight	1300 g