Sharp HT-SB107 User Manual

8
4. VOL +/- – Increase/decrease the
volume level.
5.
/ – Skip to previous/next track
in Bluetooth/USB mode.
6.
– Play/pause/resume playback in
Bluetooth/USB mode.
7.
– (MUTE) Mute or resume the
sound.
8. BASS +/- – Adjust bass level.
9. TRE +/- – Adjust treble level.
10. EQ – Select a preset sound mode.
RC OPERATIONS
The provided Remote Control allows the
unit to be operated from a distance.
• Even if the Remote Control is operated
within the e ective range of 6m, remo-
te control operation may be impossible
if there are any obstacles between the
unit and the remote control.
• If the Remote Control is operated near
other products which generate infrared
rays, or if other remote control devices
using infra-red rays are used near the
unit, it may operate incorrectly. Conver-
sely, the other products may operate
incorrectly.
BATTERY INSTALLATION
1. Press and slide the back cover to
open the battery compartment of the
remote control.
2. Insert two AAA size batteries
(included). Make sure the (+) and (–)
ends of the batteries match the (+)
and (–) ends indicated in the battery
compartment.
3. Close the battery compartment cover.
First time installation
Placement and Mounting
A B
A1
A: Normal Placement (A1 - Attach
the silicone feet to the bottom of the
soundbar.
Place Soundbar on leveled surface in
front of TV.)
B: Wall Mounting
Wall Mounting
NOTE:
 Installation must be carried out by
quali ed personnel only. Incorrect
assembly can result in severe personal
injury and property damage (if you
intend to install this product yourself,
you must check for installations such
as electrical wiring and plumbing that
may be buried inside the wall). It is the
installer’s responsibility to verify that
the wall will safely support the total
load of the unit and wall brackets.
 Additional tools (not included) are
required for the installation.
 Do not overtighten screws.
 Keep this instruction manual for future
reference.
 Use an electronic stud  nder to check
the wall type before drilling and
mounting.

Sharp HT-SB107 Specifications

General

RMS rated power	90 W
Audio output channels	2.0 channels
Audio Return Channel (ARC)	Yes
Bluetooth version	4.2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Certification	CE, REACH/PAH/SCCP
Product color	Black
Audio formats supported	MP3, WAV
Subwoofer included	-
Soundbar power consumption	20 W
Power consumption (standby)	0.5 W
Sustainability certificates	RoHS
Package depth	155 mm
Package width	740 mm
Package height	124 mm
Package weight	1900 g
Number of speakers	2

Weight and Dimensions

Depth	88 mm
Width	652 mm
Height	64 mm
Soundbar weight	1300 g