E-11
HT-SB300
2009 February 10 HT-SB300_A6_EN_UK.fm
ENGLISH
Preparation for Use
Speaker connections to TVs (continued)
Connecting to a TV
If the TV/monitor has an audio output, connect it to the LINE IN
1 sockets on the rear of the speaker.
To select LINE IN 1 function:
On speaker: Press FUNCTION button repeatedly until “L1” is
displayed.
On remote control: Press LINE button repeatedly until “L1” is
displayed.
Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the LINE
IN 2 socket on the rear of the speaker.
To select LINE IN 2 function:
On speaker: Press FUNCTION button repeatedly until “L2” is
displayed.
On remote control: Press LINE button repeatedly until “L2” is
displayed.
Notes:
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the
speaker will mute and recover after 3 seconds.
RIGHT LEFT
LINE IN 1
LINE IN 2
To audio output sockets
RCA cable (supplied)
Speaker
TV
To LINE IN 1
sockets
RIGHT LEFT
HEADPHONE
LINE IN 1LINE IN 2
To HEADPHONE socket
Audio cable (not supplied)
Speaker
TV
To AUDIO LINE
IN 2 socket
To Next Page
Loading...
Need help?
General
