DE (1)
FR (2)
ES (3)
SV (4)
IT (5)
NL (6)
PT (7)
ZH (8)
EN (9)
AR (10)
E-12
HT-SB300
2009 February 10
HT-SB300_A6_EN_UK.fm
ENGLISH
Preparation for Use
Connecting a digital tuner, etc.
Connect to the digital tuner, etc. using an optical digital audio
cable or a coaxial digital audio cable.
To select DIGITAL 1 (coaxial input) or DIGITAL 2 (optical
input) function:
On speaker: Press FUNCTION button repeatedly until “d1” or
“d2” is displayed.
On remote control: Press DIGITAL 1 or DIGITAL 2 button and
“d1” or “d2” is displayed.
Note:
When connecting with an optical digital cable, set the digital
output of the digital tuner to PCM. Refer to the operation manual
of the digital tuner.
Coaxial digital audio cable
(commercially available)
Optical digital
audio cable
(commercially
available)
To COAXIAL
input socket
To the TV (video)
To OPTICAL
input socket
Speaker
To coaxial digital audio output
socket
Audio signal
Audio signal
To optical digital
audio output
socket
To Next Page
Loading...
Need help?
General
