To Next PageTo Next PageWhat to do if noise is heard during playback on my Sharp HT-SB300 Speaker System?
If you are experiencing noise during playback with your Sharp Speaker System, try moving the speaker away from computers or mobile phones.
What to do if my Sharp Speaker System doesn't respond when a button is pressed?
If your Sharp speaker does not respond when a button is pressed, set the speaker to stand-by mode and then turn it back on.
Why is no sound heard from my Sharp HT-SB300 Speaker System?
If you are not getting any sound from your Sharp Speaker System, check the following: * Ensure the input signal (selection) is set properly. * Verify the volume level is not set to “0”. * Confirm that muting is not activated.
General| Type | Soundbar |
|---|---|
| Channels | 2.1 |
| Total Power Output | 300W |
| Subwoofer | Yes |
| Wireless Subwoofer | No |
| Bluetooth | Yes |
| HDMI Inputs | 1 |
| Optical Inputs | 1 |
| Remote Control | Yes |
| Wall Mountable | Yes |
| Audio Inputs | Analog (3.5mm) |
Critical warnings regarding standby power, dangerous voltages, and user-serviceable parts.
Identifies and explains the buttons and indicators on the front of the speaker.
Recommendations for cleaning the speaker cabinet and understanding error indicators.
