Sharp HT-SB38 User Manual

E-14
General control (continued)
 To select a menu on the remote control
1. Press MENU button.
2. To select a menu, press
or button, then press
button.
3. Press
or button to select an option in the desired
menu.
4. To select another menu, press
button and repeat steps
2 to 3 above.
Menu/
Function
Level/Mode
3D AUDIO 3D AUDIO 0 1 2
AV SYNC AV SYNC 0 1 2 3
APC 5 MIN 10 MIN 15 MIN 20 MIN
SW LEVEL -5 -4 ..... 0 +4 +5
ECO MODE ECO MODE ON OFF
PAIRING To link the remote control and sound bar
manually.
TV CODE TV CODE 1 2
VERSION Displays remote control and software version
 Volume auto fade-in
If you turn off and on the sound bar with the volume set
to 20 or higher, the volume starts at lower level and fades
in to the last set level.
 Volume control
Sound bar operation:
Press the VOLUME +
button to increase the
volume and the VOLUME –
button for decreasing.
MIN MAX
2 99
.....
1
Remote control operation:
Press the VOL. + button to increase the volume and the
VOL. – button to decrease the volume.
 Muting
The volume is muted temporarily when pressing the
MUTE button on the remote control. Press again to
restore the volume.
Note:
When the sound bar is turned off and back on again,
muting is cancelled.
 Sound Mode
To change to a different mode, press the SOUND MODE
button repeatedly on the sound bar or remote control
until the desired sound mode is displayed.
CINEMA (for cinema sound effect)
MUSIC (for standard sound effect)
GAME (for game sound effect)
SPORT (for sport broadcasting)
NEWS (for news)
NIGHT (for night)
BYPASS (for flat sound effect)
 Bass and Treble Control (remote control)
Bass Control
1. Press the BASS/TREBLE button to select bass.
2. Within 5 seconds, press the VOL. (+ or –) or
/
button to adjust the bass.
Treble Control
1. Press the BASS/TREBLE button repeatedly to select
treble.
2. Within 5 seconds, press the VOL (+ or –) or
/
button to adjust the treble.
 Subwoofer level control (remote control)
To increase or decrease
the Subwoofer level, select
SW LEVEL from the remote
control menu.
+5–5 –4 +4
.....
Notes:
z When sound from the speaker is distorted, decrease
the subwoofer level.
z When changing the subwoofer level, the output level
of the subwoofer is also changed.
 AV SYNC level control (remote control)
To increase or decrease
the AV sync level, select
AV SYNC from the remote
control menu.
0+1 +3
.....
 Speaker output selection
(HDMI connection) (remote control)
Press button on the remote control until “TV
SPEAKER” or “SOUND BAR SPEAKER” appears on the
display to toggle sound output between this sound bar
or TV.
 Function
TV ARCHDMI 2 OPTICAL
AUDIO IN
HDMI 1
BLUETOOTH
Press the INPUT button repeatedly on the sound bar or
remote control to select the desired input source.
Note:
The backup function will protect the memorized function
mode for a few hours should there be a power failure or
the AC power cord becomes disconnected.

Sharp HT-SB38 Specifications

General

Brand	Sharp
Model	HT-SB38
Category	Home Theater System
Language	English