Sharp HT-SB40 User Manual

9
1
7
6
5
4
3
2
1
9
2012 December 21
HT-SB40
E-13
Press and hold (MUTE) button on the remote control
until “TV SPEAKER” or “SB SPEAKER” appears on the
display to toggle sound output between this sound bar or
TV.
Note:
The backup function will protect the memorized function
mode for a few hours should there be a power failure or the
AC power cord becomes disconnected.
The audio return channel (ARC) function enables an HDMI
ARC-capable TV to send the audio stream to the HDMI OUT
terminal of the receiver. To use this function, you must select
the TV ARC input and your TV must supports the ARC.
S+ 3D technology creates 3D sound through speakers
regardless of the type of sound source, whether it is
monaural, stereo or multichannel. It simulates sound
transmission characteristics using digital signal processing
to create a widening effect on the sound in the ambient
space around the sound source.
By using this technology, multichannel surround sound can
be produced from 2.1ch source.
Press the 3D AUDIO button repeatedly to select:
This product incorporates decoders supporting the Dolby
Digital system and DTS system.
You can operate Sharp TVs with this system’s remote
control.
Other operable button
The AV SYNC level can be
adjusted.
To increase the level, press
the AV SYNC + button.
To decrease the level, press the AV SYNC – button.
When pressing the SOURCE button, the input source will
change. Press the SOURCE button repeatedly to select
desired input source, or
press TV ARC button on the remote control to select TV ARC.
This sound bar can be set to turn off automatically if no signal is
detected.
1. Press the APC button repeatedly to select the time.
2. The sound bar will enter the power stand-by mode
automatically if no signal is detected after the preset
time has elapsed.
Notes:
● APC (Auto Power Off Control) is only applicable for TV
ARC, OPTICAL and AUDIO IN input function. It will not
work for HDMI 1 or HDMI 2 input function.
● This system will automatically power off if TV or similar
component which supports HDMI CEC is turned off.
● During OPTICAL input function, if you mute or pause
the playback (depending on the connected
component), APC function will be activated. The
system will turn off after the preset time has elapse.
General control (continued)
AV SYNC level control
0+1 +3
.....
Speaker output selection (HDMI connection)
Function
TV ARCHDMI 2 OPTICAL
AUDIO IN
HDMI 1
APC (Auto Power Off Control)
APC 15 min
A
PC 20 min
APC 10 minAPC 5 min
Audio Return Channel (ARC) (Audio
Return Channel submenu)
3D AUDIO 1 : Sound effect that emphasizes 3D
sound.
3D AUDIO 2 : Sound effect that maintains the 3D
sound and improve vocal clarity.
3D AUDIO OFF : 3D sound effect off.
DTS (Digital
Theater
Systems)
One of the digital audio systems for theatrical
use. As the sound quality is emphasized, you
can enjoy the realistic sound effect in the home
theater system.
Lights up when detecting DTS signal.
Dolby Digital One of the digital audio systems for theatrical
use. You can also enjoy the stereophonic effect
in the home theater system.
Lights up when detecting Dolby Digital signal.
PCM
(Pulse Code
Modulation)
This is a general term for digitally encoded audio
signals on a CD or DVD.
This sound bar lets you enjoy playback of digital
signals from sources such as CD or DVD.
Point the remote control at the TV.
1 Press the TV ( ) ON/STAND-BY button to turn on
the TV.
2 Pressing the TV CH or button enables TV
channel switching.
3 Press the TV VOL + or – button to adjust the TV
volume.
Input Select Button
General control (continued)
3D sound mode
Operating the TV with the remote
control
Watching TV

Sharp HT-SB40 Specifications

General

Brand	Sharp
Model	HT-SB40
Category	Home Theater System
Language	English