Sharp HT-SB95 Quick Start Guide

3
ENGLISH
Before using your product, read all safety
instructions. For full instructions please refer
to the user guide available to download from
the website sharpconsumer.eu.
1– Getting started - initial set up
1. Use the inputs on the rear panel of the
soundbar to connect external audio
and video devices equipped with the
corresponding outputs (Pic. 1). You will
achieve the best sound quality by using
the digital inputs OPTICAL and HDMI.
Caution! Turn all devices o and disconnect
them from the power supply before starting
any connection.
2. Plug the soundbar power cord in a wall
outlet to power the device.
3. Remove the protective tab from
provided remote control to activate the
remote control battery.
4. Press the
button on the remote
control to switch the main unit ON
or OFF.
5. Press the
button on the unit
repeatedly or press the AUX, BT
(Bluetooth), OPTICAL, HDMI ARC
buttons on the remote control to select
the desired mode.
2– Remote control
1. – Switch the unit between ON and
STANDBY mode.
2. MUTE – Mute or resume the sound.
3. Function buttons – Select the play
function.
4. VOL+/VOL- – Increase/decrease the
volume level.
5.
/ – Skip to previous/next track in
Bluetooth mode.
6. PAIR – Press to activate the pairing func-
tion in Bluetooth mode or disconnect
the existing paired Bluetooth device.
7.
– Play/pause/resume playback in
Bluetooth mode.
3– Controls
1. LED Indicators
•
Red indicator: In STANDBY mode.
•
Green indicator: In AUX mode.
•
Orange indicator: In Optical mode.
•
Blue indicator: In Bluetooth mode.
••
White indicator: In HDMI ARC mode.
2.
button – Switch the unit between ON
and STANDBY mode.
3.
button – Select the play function.
4.
button – Select the Bluetooth
mode. Press and hold to activate the
pairing function in Bluetooth mode or
disconnect the existing paired Bluetooth
device.
5.
/ PAIR – Press and hold to activate the
pairing function in Bluetooth mode or
disconnect the existing paired Bluetooth
device. Play/pause/resume playback in
Bluetooth mode.
6. +/- buttons – Increase/decrease the
volume level.
Bluetooth Operation
Pair Bluetooth-enabled Devices
The rst time you connect your Bluetooth
device to this player, you need to pair your
device to this player.
1. While in ON mode, press the (Bluetooth)
button on the remote control or on the
unit to select Bluetooth mode. The Blue
indicator will light ash.
2. Activate your Bluetooth device and
select the search mode. “SHARP HT-
SB95” will appear on your Bluetooth
device list.
If you cannot nd the unit, press and hold the
„
/PAIR“ button on the unit to be searchable.
After the “Pairing” voice prompt and the Blue
indicator will ash rapidly.
3. Select “SHARP HT-SB95” in the pairing
list. After the “Paired” voice prompt, the
system is successfully connected and
the Blue indicator will light up solidly.
4. Begin playing music from the connected
Bluetooth device.

Sharp HT-SB95 Specifications

General

RMS rated power	40 W
Audio output channels	- channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Certification	CE, CB, ErP
Product color	Black
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Package depth	125 mm
Package width	1010 mm
Package height	105 mm
Package weight	2000 g

Weight and Dimensions

Depth	66 mm
Width	800 mm
Height	84 mm
Soundbar weight	1400 g