HT-SL50
–2
CHAPTER 1: GENERAL DESCRIPTION
[3] Specifications
WARNING
This unit contains no user serviceable parts. Never remove covers unless qualified to do so.
This unit contains dangerous voltages, always remove mains plug from the socket before any service
operation and when not in use for a long period.
General Soundbar speaker
Subwoofer
[2] Important Service Notes (for U.K. only)
[1] Safety Precaution For Service Manual
Before returning the unit to the customer after completion of a repair or adjustment it is necessary for the following withstand voltage test to be
applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
Set name set value
Withstanding Voltage Tester
Te st voltage 4,240 VPEAK
3,000 VRMS
Set time 6 secs
Set current (Cutoff current) 4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
PROBE
AC
OUT
UNIT
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO SHELL OF AUDIO LINE IN
WITHSTANDING
VOLTAGE TESTER
Power source AC 220 - 240 V ~ 50/60 Hz
Power
consumption
Power On: 25 W
Power Stand-by: Below 1 W
Output power RMS: Tot al 100 watts
RMS:
Front Left/Right:
RMS: 50W (25W + 25W) (10% T.H.D.)
RMS: 48W (24W + 24W) (1% T.H.D.)
Subwoofer:
RMS: 50W (10% T.H.D.)
RMS: 50W (1% T.H.D.)
Output
terminal
HDMI™ (with Audio Return Channel)
output: (audio/video support to 1080p)
x 1
Input
terminal
Analogue input (Audio in):
Stereo mini socket Ø 3.5 mm
HDMI input: (audio/video support to
1080p) x 1
Type Full Range speaker system
2.2 x 11.5 cm (7/8" x 4-1/2")
Full Range
Maximum
input power
50 W/CH
Rated input
power
25 W/CH
Impedance 4 ohms/CH (3 pieces parallel)
Dimensions Width: 801 mm (31-1/2")
Height: 26 mm (1-1/16")
Depth: 50 mm (2")
Weight 0.66 kg (1.46 lbs.)
Type Subwoofer system
16 cm (6 - 5/16") woofer
Maximum
input power
100 W
Rated input
power
50 W
Impedance 8 ohms
Dimensions Width: 115 mm (4 - 1/2")
Height: 422 mm (16 - 5/8")
Depth: 307 mm (12 - 1/16")
Weight 4.50 kg (9.92 lbs.)
1 – 1