R
randallheathJul 30, 2025
Why is the orange light on my Sharp IG-CL15UW?
- AAnne ParsonsJul 30, 2025
The orange light indicates the filter is getting dirty. Clean the filter, and then press the Filter Reset Button for 3 seconds.
To Next PageTo Next PageWhy is the orange light on my Sharp IG-CL15UW?
The orange light indicates the filter is getting dirty. Clean the filter, and then press the Filter Reset Button for 3 seconds.
What to do if my Sharp IG-CL15UW is flashing red?
A flashing red light indicates it’s time to replace the Plasmacluster Ion Generating Unit with a new one.
What to do if my Sharp IG-CL15UW is flashing orange and blue?
The filter may be blocked by dust, so clean the filter. Also, remove dust from the needle electrode. If the lights continue to flash after cleaning, unplug the unit and contact the store where you purchased it or a Sharp service center.
General| Brand | Sharp |
|---|---|
| Model | IG-CL15UW |
| Category | Air Cleaner |
| Language | English |
Provides the toll-free number for service, parts, and information.
Gives the address for written inquiries regarding service and warranty.
Directs users to the official website for support and information.
Details the product model number and the duration of the warranty.
Outlines what is covered and how to get service for warranty claims.
Provides the Canadian phone number for service, parts, and information.
Gives the Canadian mailing address for service and warranty inquiries.
Directs users to the Canadian website for support and information.
Lists the warranty duration for various Sharp consumer electronics products.
Crucial safety advice to prevent electric shock, fire, or injury.
Guidelines for safe and proper operation of the unit.
Recommendations for safe placement and installation of the unit.
Information regarding potential interference and how to mitigate it.
Labels and identifies parts visible on the front of the unit.
Labels and identifies parts visible on the back of the unit.
Describes the quiet operation mode for releasing ions.
Describes the high-speed mode for releasing ions efficiently.
Indicates the state when the unit is turned off.
Instructions for wiping and cleaning the exterior of the main unit.
Steps for removing dust and rinsing the filter.
Explains when the Plasmacluster Ion Generating Unit needs replacement.
Guides on installing a new unit, filter, and disposing of the old one.
