Sharp IG-NX2B - Page 15

EN-13
ENGLISH
4.
Insert the filters into the
Filter Cover.
Insert the Filter to
the upper claw.
Insert the Filter to
the lower claw.
Filter
5.
Reattach the Filter Cover.
• See step 4 of “ASSEMBLING”
on page 11
PLASMACLUSTER ION GENERATING UNIT
(Electrode section)
1.
Take the Unit Holder and the Unit Cleaning Brush.
• See step 1 to 4 of “DISASSEMBLING” on page 10.
2.
Remove dusts from the electrodes and around the
base by the Unit Cleaning Brush.
After
Cleaning
Electrode
Around
the base
3.
Assemble the product.
• See step 1 to 4 of “ASSEMBLING” on page 11.
Every 6 months or more often if necessary
01_IG-NX2B_IG-NX2Y-EN.indd EN-1301_IG-NX2B_IG-NX2Y-EN.indd EN-13 2/6/2564 BE 20:532/6/2564 BE 20:53