EN-15
ENGLISH
TROUBLESHOOTING
The Plasmacluster Ion Generator does not work.
• Is the Car Adapter connected properly? Ensure it is connected
correctly. (Page 6)
The operation does not stop although the engine of
vehicle is switched OFF.
• If the product is operating even though the key of the vehicle is
pulled out or the engine switch is turned OFF, pull out the Car
Adapter out to prevent having a dead battery. (Page 9)
The product does not operate in conjunction with
engine.
• In a vehicle where the power is supplied to the accessory socket
even if the engine of vehicle is switched OFF, the engine
interlocking function cannot be used.
3.
Attach a New Unit to the Unit
Holder.
Attach
New Unit
4.
Assemble the product.
• See step 1 to 4 of “ASSEMBLING”
on page 11.
5.
Insert the Car Adapter in the accessory socket and
check the Unit Replacing Lamp is turned OFF.
<For Disposal>
Please dispose of the used Plasmacluster Ion Generating
Unit according to any local laws and regulations.
- Materials -
• Polybutylene Terephthalate, Electronic parts
01_IG-NX2B_IG-NX2Y-EN.indd EN-1501_IG-NX2B_IG-NX2Y-EN.indd EN-15 2/6/2564 BE 20:532/6/2564 BE 20:53
To Next Page
Loading...
