Sharp JH-1600E

23
Specification
Electrical Specification
Environment Specification
Mechanical Specification
Input JH-1600E
Absolute maximum array open circuit voltage 350 VDC
Start voltage Above 70 VDC
Input voltage, operation voltage range 60~320 VDC
Input voltage, MPPT voltage range 60~320 VDC
Input voltage, Maximum power point range* 200~320 VDC
MPPT tracker 1
Maximum input current 8.5 A
Standby mode (In night or No DC power) 230 V
AC, 50 Hz, 0.16 A, 1 Watt max.
Output JH-1600E
Maximum output power
1600 W
Nominal output voltage 230 V
AC
Operating range, utility voltage 210~255 VAC
Nominal output frequency 50 Hz
Operating range, utility frequency 47~53 Hz
Nominal continuous output current 7 A
Maximum continuous output current 7.6 A
Output over-current protection 10 A
Maximum utility backfeed current 0 A
Total current harmonic distortion <5%
Power factor >0.99
Utility monitoring - islanding protection V
AC, Fac as per AS 4777.2
Output characteristics Current source
Output current waveform Sine wave
Operating temperature range -20°C~60°C (derating at 40~60°C)
Storage temperature range -20°C~60°C
Relative humidity 5%~90%
Audible noise <29 dB-A (1m forward front panel)
Operating elevation 0~2000m (0~6666ft)
JH-1600E
Outdoor enclosure Main body IP65 wiring box IP55
Dimensions - without wall mount (H*W*D / mm) 440*348*141 mm
Dimensions - with wall mount (H*W*D / mm) 440*348*153 mm
Shipping dimension (H*W*D / mm) 515*450*290 mm
Inverter weight 12 kg
Shipping weight 15.5 kg
Input connection From AWG #16 to AWG #10
Output connection From AWG #16 to AWG #10