E-8
CLEAN AIR & HUMIDIFY MODE
OPERATION
Use the Clean Air & Humidify Mode to quickly clean the air, reduce odours and to humidify.
Fill Water Tank. (See E-7)
About Automatic Humidify Mode
1
2
3
Press the FAN SPEED Button to select the de-
sired fan speed.
Press the CLEAN AIR & HUMIDIFY MODE Button.
• If the power cord was not unplugged between uses, the
unit will automatically re-start at the previously selected
settings.
About the Temperature/Humidity Sensors. The Temperature/
Humidity sensors automatically detect and adjust humidity
according to changes in room temperature. Depending on
the size and humidity of the room, humidity may not reach
55~65%. In such cases, it is recommended that CLEAN AIR
& HUMIDIFY/MAX MODE be used.
Temperature
~18ºC
18ºC~24ºC
24ºC~
Humidity
65%
60%
55%
Power OFF Button
Power ON Button
Light ON/OFF Button
Fan Speed Button/
Indicator Light (green)
CLEAN ION SHOWER MODE Button/
Indicator Light (blue)
Press any of the buttons to se-
lect mode and start the unit.
Clean Air & Humidify MODE Button/
Indicator Light (green)
Clean Air MODE Button/
Indicator Light (green)
MAIN UNIT DISPLAY
• Indicator lights will show the fan speed
currently selected.
Press the Power OFF Button to turn the unit off.
Filter Reset Button/
Indicator Light (red)
Plasmacluster ON/OFF Button/
Indicator Light (green)
KC-C100E_Eng.indd 10 07.11.13 1:24:51 PM
To Next Page
Loading...
Need help?
General
