ENGLISH
DEUTSCH
NEDERLANDS
РУССКИЙ
POLSKI
FRANÇAIS
Press the CLEAN AIR MODE Button on the display
.
E-9
Use the Clean Air Mode when additional humidity is not required.
1
2
• If the power cord was not unplugged between uses, the unit
will automatically re-start at the previously selected settings.
Press the FAN SPEED BUTTON to select the
desired fan speed.
CLEAN ION SHOWER MODE
1
Press the CLEAN ION SHOWER MODE Button
on the display to select this mode.
When the operation nishes, the unit will return to the prior
operation.
CLEAN AIR MODE
CLEAN ION SHOWER Mode with humidication releases concentrated Plasmacluster ions.
By repeating strong and gentle airow cycles, the unit effectively removes airborne dust, pol-
len, mold and allergens from the air drawn through the lter system. Water must be in the Wa-
ter Tank when this mode is selected.
The unit humidies when there’s water in the Water Tank, and it operates without humidifying
when there’s no water in it.
• Indicator lights will show the fan speed
currently selected.
Press the Power OFF Button to turn the unit off.
Press the Power OFF Button to turn the unit off.
The Fan Speed
Please note the fan speed cannot be sdjusted during the CLEAN ION SHOWER MODE.
AUTO operation
MAX operation
MEDIUM operation
LOW operation
The fan speed is automatically switched (between HIGH and
LOW) depending on the amount of impurities in the air. The
sensors detect impurities for efcient air purcation.
The unit will operate at maximum fan speed.
The unit will operate at medium fan speed.
The unit will operate quietly using minimal air intake.
*HiGH fan speed is an intermediate speed between MEDIUM and MAX.
KC-C100E_Eng.indd 11 07.11.13 1:24:52 PM
To Next Page
Loading...
Need help?
General
