To Next PageTo Next PageHow to reset Sharp KC-D60E filter light?
If the Filter Indicator Light is illuminated on your Sharp Air Cleaner, after replacing the filters, connect the power cord to an outlet and press the Filter Reset Button.
How to improve Sharp Air Cleaner performance when odours and smoke are not removed?
If odours and smoke are not being removed by your Sharp Air Cleaner, the filters might be heavily soiled. Try cleaning or replacing the filters.
Why does my Sharp Air Cleaner have an odour?
If the discharged air from your Sharp Air Cleaner has an odour, it could be due to a few reasons. First, check if the filters are heavily soiled and clean or replace them. Also, Plasmacluster Air Purifiers emit small traces of ozone which may produce an odour.
What to do if Sharp KC-D60E Dust/Odour Monitor is red when air is clean?
If the Dust/Odour Monitor on your Sharp Air Cleaner illuminates orange or red even when the air is clean, the dust sensor openings may be dirty or clogged. Gently clean the dust sensors.
Why Sharp KC-D60E doesn't work with cigarette smoke?
If your Sharp Air Cleaner doesn't operate when cigarette smoke is in the air, ensure the unit is in a location where the sensor can easily detect smoke. Also, check if the dust sensor openings are blocked or clogged and clean them if necessary.
Why Sharp KC-D60E Air Cleaner water level doesn't decrease?
If the water level in the tank of your Sharp Air Cleaner does not decrease or decreases slowly, check if the Humidifying Tray and Water Tank are correctly installed. Also, inspect the Humidifying Filter and clean or replace it if it is heavily soiled.
What to do if Sharp KC-D60E shows green light when air is bad?
If the Dust/Odour Monitor on your Sharp Air Cleaner illuminates green even when the air is impure, unplug the unit, wait one minute, and then plug it back in.
Why is Sharp KC-D60E Dust/Odour Monitor turned off?
If the Dust/Odour Monitor on your Sharp Air Cleaner is turned off, check to see if the Lights OFF Mode is selected. If so, press the Lights Control Button to activate the indicator lights.
How to fix abnormal humidity filter in Sharp Air Cleaner?
If there is an abnormal humidity filter issue with your Sharp Air Cleaner, verify if the Humidifying Filter, Humidifying Tray and Roller are properly installed and then turn the power ON again.
How to fix abnormal fan motor in Sharp KC-D60E Air Cleaner?
If there is an abnormal fan motor issue with your Sharp Air Cleaner, unplug the unit, wait one minute, and plug the unit in again.
General| Recommended Room Size | Up to 48 m² |
|---|---|
| Applicable Area | 48 m² |
| Dust Sensor | Yes |
| Odor Sensor | Yes |
| Type | Air Purifier |
| Technology | HEPA Filter |
| Air Flow (max) | 396 m³/h |
| Filter Type | HEPA Filter |
Identifies front and back components of the unit.
Step-by-step guide for installing the air purifier filters.
Operation mode for cleaning air, reducing odors, and humidifying.
Operation mode for air cleaning when additional humidity is not required.
Operation mode for releasing Plasmacluster ions and strong airflow for 60 minutes.
Adjusts the brightness of the unit's indicator lights.
Sets the unit to automatically start at a selected time.
Sets the unit to automatically stop at a selected time.
Controls the sensitivity of the dust and odor sensors.
Indicates when filter maintenance is required.
Lists common indicators for maintenance needs like odor or reduced performance.
Instructions for removing the humidifying parts for maintenance.
Information on when to replace the HEPA, Deodorizing, and Humidifying filters.
Lists the model numbers for replacement filters for KC-D40E and KC-D60E.
Guidance on how to dispose of used air purifier filters.
