To Next PageTo Next PageWhy is the front display turned off on my Sharp KC-G50E?
If the Front Display is turned off on your Sharp Air Cleaner, it may be due to the Light control setting. When set to 'Auto', the light turns off automatically in a dark room. When set to 'Turn off', the light is always off. To keep the light on, set Light control to the 'Darker' setting.
How to turn on the display light on Sharp KC-G50E?
If your Sharp Air Cleaner's front display is turned off, adjust the Light control to the 'Darker' setting if you prefer the light to be on.
What to do if the Cleanliness Monitor on my Sharp KC-G50E Air Cleaner is always blue?
If the Cleanliness Monitor on your Sharp Air Cleaner is showing blue even when the air is not clean, unplug the unit, wait one minute, and then plug it back in.
Why does my Sharp Air Cleaner smell?
If the air discharged from your Sharp Air Cleaner has an odor, check if the filters are extremely dirty and clean or replace them. Also, ensure you are using fresh tap water. Using other water sources can lead to the growth of mold, fungi, or bacteria.
How to eliminate persistent odor and smoke from my Sharp KC-G50E?
If odor and smoke persist when using your Sharp Air Cleaner, check the filters. If they appear extremely dirty, clean or replace them.
What to do if the Sharp KC-G50E displays an error?
Make sure that the Humidifying Filter and Humidifying Tray are properly installed, and then turn the power to ON again. Alternatively, unplug the unit, wait one minute, and then plug the unit in again.
Why doesn't the HAZE/PM2.5 Light match local data on my Sharp Air Cleaner?
Outdoor and indoor conditions, as well as the home environment (the volume of traffic nearby, number of stories in home, etc.) may cause a reading different than local PM2.5 data.
Why is there a discrepancy between the unit’s Humidity Monitor and another hygrometer in the room with my Sharp KC-G50E?
There is a difference in the humidity level within the same room. The sensor have different measurement parameters. If the monitor indicates wattage or temperature, switch the display by pressing the DISPLAY SELECT button.
What to do if the Cleanliness Monitor light is red even when the air is clean on my Sharp Air Cleaner?
If the Cleanliness Monitor light is red on your Sharp Air Cleaner even when the air is clean, the dust sensor openings may be dirty or clogged, interfering with sensor operation. Gently clean the sensor filter or the back panel.
Why doesn't the Humidify Light turn on when the tank is empty on my Sharp KC-G50E Air Cleaner?
If the Humidify Light on your Sharp Air Cleaner's display doesn't light up when the tank is empty, check the styrofoam float for impurities, clean the Humidifying Tray, and ensure the unit is on a level surface.
General| Type | Air Purifier with Humidifier |
|---|---|
| Recommended Room Size/Coverage Area | Up to 38 m² |
| Humidification Capacity | 500 ml/h |
| Water Tank Capacity | 2.5 L |
| Technology | Plasmacluster Ion Technology |
| Dust Sensor | Yes |
| Odor Sensor | Yes |
| Filter Type | HEPA Filter |
Explains the 6 sensors and 7 factors for automatic operation.
Always follow basic safety precautions when using electrical appliances.
Explains the control panel buttons and front display indicators.
Covers Start/Stop, Haze, Intelligent, and Auto modes.
Addresses common symptoms and their remedies for unit malfunctions.
Explains digital error indications and their resolution.
