How to reset the filter indicator on Sharp KC-G60Y?
If the FILTER RESET Indicator Light is on in your Sharp Air Cleaner, after maintenance or filter replacement, connect the power cord to an outlet and then press the Filter Reset Button.
How to eliminate persistent odor and smoke from Sharp KC-G60Y?
If odor and smoke persist with your Sharp Air Cleaner, examine the filters. If the filters appear extremely dirty, you should clean or replace them.
Why does my Sharp Air Cleaner emit an odor?
If the air discharged from your Sharp Air Cleaner has an odor, check the filters for excessive dirt. Clean or replace the filters, and ensure you are using fresh tap water. Other water sources can encourage the growth of molds, fungi, or bacteria.
What to do if Sharp Air Cleaner doesn't work with cigarette smoke?
If your Sharp Air Cleaner doesn't operate when cigarette smoke is present, ensure it's positioned where sensors can detect the smoke. Also, check the dust sensor openings for blockages; if blocked, clean the sensor filter or the back panel.
Why is the Cleanliness Monitor on my Sharp Air Cleaner red when the air is clean?
If the Cleanliness Monitor light on your Sharp Air Cleaner is red even when the air seems clean, the dust sensor openings might be dirty or clogged, interfering with the sensor's operation. Gently clean the sensor filter or the back panel.
Why does the Cleanliness Monitor on my Sharp Air Cleaner change color so often?
The Cleanliness Monitor on your Sharp Air Cleaner automatically changes color when the dust and odor sensors detect impurities. If you're concerned about the frequent changes, you can adjust the sensor sensitivity.
Why is the Front Display off on my Sharp KC-G60Y?
If the Front Display on your Sharp Air Cleaner is off, it might be due to the Light control setting. When set to 'Auto', the light turns off in dark rooms. If set to 'Turn off', the light is always off. To keep the light on, set Light control to the 'Darker' setting.
Why is the Cleanliness Monitor on my Sharp KC-G60Y blue when the air is dirty?
If the Cleanliness Monitor on your Sharp Air Cleaner is blue even when the air isn't clean, the unit may have been plugged in when the air was already dirty. Unplug the unit, wait one minute, and then plug it back in.
Why isn't the water level decreasing in my Sharp KC-G60Y's tank?
If the water level in the tank of your Sharp Air Cleaner isn't decreasing or is decreasing slowly, check if the Humidifying Tray and Water Tank are correctly installed. Also, inspect the Humidifying Filter; if it's extremely dirty, clean or replace it.
Why is there a difference between Sharp KC-G60Y Air Cleaner's humidity reading and another hygrometer?
A discrepancy between your Sharp Air Cleaner's Humidity Monitor and another hygrometer may occur due to differences in humidity levels within the room or because the sensors have different measurement parameters. If the monitor indicates wattage or temperature, switch the display by pressing the DISPLAY SELECT button.
General| Type | Air Purifier with Humidifier |
|---|---|
| Recommended Room Size | 48 m² |
| Humidification Capacity | 600 ml/h |
| Filter Type | HEPA Filter |
| Filter Life Time | 10 years (HEPA Filter) |
To Next Page
