EN-11
ENGLISH
How to set Wi-Fi ON / OFF after
completing the INITIAL SET UP
If you would like to turn the Wi-Fi
OFF:
Press for 3 sec.
♪
～
NOTE
• Turning the Wi-Fi off will result in not being able
to control the air purifier with the designated
App.
If you would like to turn the Wi-Fi ON
again:
(How to restore the Wi-Fi connection to the
original network.)
Press
for 3 sec.
♪
The Wi-Fi Lamp will flash after you press the Wi-
Fi Button. And within about 3 minutes, you will hear
four short beeps. Some time after this beep sounds,
the Wi-Fi Lamp lights up and the Wi-Fi connection
will be restored to the original network. The
designated App can now be used again to control
the Air Purifier.
NOTE
• Wi-Fi ON / OFF can also be set from “ : Wi-
Fi adapter ON/OFF”.
(Page 14, 16)
In this case, Wi-Fi connection with the router
will be automatically restored.
• Reconnection to the Wireless Router may take
a few minutes to complete, after turning Wi-Fi
on again.
2.
Follow instructions on the App.
• If the Wi-Fi Lamp lights up after the
notification sound, the connection is
successfully completed.
Light up
Tap “REGISTER”.
3 CONNECTION BETWEEN THE
AIR PURIFIER AND A SMART
DEVICE
1.
Tap “Register” for the air purifier
you would like to register.
(MODEL NAME)
• If you do not see the screen above, tap
“ ” at the “Home” screen, and select
“Register Device” “Already connected
with a router”.
2.
Follow instructions on the App.
• If the Wi-Fi Lamp lights up after the
notification sound, the connection is
successfully completed.
Light up
The INITIAL SET UP is completed.
To Next Page
Loading...
