EN-12
START/STOP
START STOP
NOTE
• When the product starts operation, the
operation starts in the previous mode it was
operated in.
SELECT AIR VOLUME
AND MODE
♪
♪
♪
♪♪
♪
♪
LOW
MED
MAX
AUTO
POLLEN
SLEEP
AUTO:
The fan speed is automatically switched depending
on the amount of impurities in the air.
You can select humidification ON / OFF.
POLLEN:
The Sensitive Dust Sensor sensitivity is
automatically increased and the Sensitive Dust
Sensor quickly detects impurities such as dust and
pollen and cleans the air powerfully.
SLEEP:
The product will operate quietly, and the fan speed
will automatically switch depending on the amount
of impurities in the air and room brightness.
When the Light Control is set to “Auto”, the Display
and Cleanliness Indicator will automatically go off.
SHARP COCORO AIR
MODE
When the product is connected to Sharp
Cloud
Sharp Cloud will analyze and set the optimal
operation for your room based on the information
retrieved from sensors on the product and your
usage records.
When the product is not connected to
Sharp Cloud
The fan speed and the humidification ON / OFF
are automatically controlled depending on the six
detection. (PM2.5 / Usual dust / Odor /
Temperature / Humidity / Light)
NOTE
• If press the Humidify ON/OFF Button, the
operation mode will change to (AUTO).
To Next Page
Loading...
