To Next PageTo Next PageWhat to do if my Sharp KI-A60Y has an odour?
If the air discharged from your Sharp Air Cleaner has an odour, it could be due to extremely dirty filters. Try cleaning or replacing the filters. Also, note that Plasmacluster Air Purifiers emit small traces of ozone that can produce an odour.
How to reset the filter indicator light on my Sharp KI-A60Y Air Cleaner?
Whenever you replace the filters on your Sharp Air Cleaner, connect the power cord to an outlet and then press the Filter Reset Button.
What to do if the Front Monitor light is orange or red on my Sharp Air Cleaner even when the air is clean?
If the Front Monitor light on your Sharp Air Cleaner is orange or red even when the air seems clean, the dust sensor openings might be dirty or clogged, interfering with the sensor's operation. Gently clean the back panel.
What to do if my Sharp KI-A60Y's Front Monitor light is green even when the air is not clean?
If the Front Monitor light on your Sharp Air Cleaner is green even when the air is not clean, unplug the unit, wait one minute, and then plug it in again.
What to do if my Sharp Air Cleaner is not operating when cigarette smoke is in the air?
If your Sharp Air Cleaner doesn't operate when cigarette smoke is in the air, ensure the unit is in a location where the sensors can easily detect smoke. Also, check if the dust sensor openings are blocked or clogged, and clean the back panel if necessary.
What does it mean if my Sharp Air Cleaner makes a clicking or ticking sound?
Your Sharp Air Cleaner may make clicking or ticking sounds when it is generating ions.
Why is the water level in my Sharp Air Cleaner tank not decreasing?
If the water level in your Sharp Air Cleaner's tank isn't decreasing or is decreasing slowly, check if the Humidifying Tray and Water Tank are correctly installed. Also, check the Humidifying Filter; if it's extremely dirty, clean or replace it.
Why do the Front Monitor lights change colour frequently on my Sharp KI-A60Y?
The Front Monitor lights on your Sharp Air Cleaner automatically change color when the dust sensor and odour sensor detect impurities.
What to do if the Water Supply Indicator Light does not light up on my Sharp Air Cleaner?
If the Water Supply Indicator Light on your Sharp Air Cleaner does not light up when the tank is empty, check the styrofoam float for impurities, clean the Humidifying Tray, and make sure that the unit is on a level surface.
What to do if I have a Humidity filter error on my Sharp Air Cleaner?
If you are experiencing a Humidity filter error on your Sharp Air Cleaner, make sure that the Humidifying Filter, Humidifying Tray, and Water Tank are properly installed, and then turn the power to ON again.
General| Brand | Sharp |
|---|---|
| Model | KI-A60Y |
| Category | Air Cleaner |
| Language | English |
Explains the Plasmacluster and High-Density 25000 ion technology used in the air purifier.
Details the Pre-Filter, Deodorizing Filter, and HEPA Filter functionality.
Highlights dust trapping, odor reduction, pollen removal, and air freshening.
Describes humidifying function, capacity, and automatic air quality adjustment.
Covers precautions for electrical shock, fire, and proper unit operation.
Advises on operating environments, cleaning, water hygiene, and radio interference.
Details operational restrictions, handling, and filter care warnings.
Specifies placement guidelines for optimal performance and safety.
Identifies external and internal parts of the air purifier unit.
Explains the functions of buttons and indicator lights on the main display.
Details the indicators for air purity, humidity, and water levels.
Step-by-step guide for correctly installing the HEPA and Deodorizing filters.
Advises on safe removal, filling, and installation of the water tank.
Instructions for operating the unit to clean and humidify air simultaneously.
Guide for using the unit when only air purification is needed.
Details the operation of the 60-minute intensive air purification mode.
Explains fan speed settings and how to control Plasmacluster ion function.
How to adjust display brightness, enable child lock, and set sound alerts.
Procedure to adjust dust and odor sensor sensitivity levels.
How to toggle display indicators and set the automatic shut-off timer.
Details how the unit resumes operation after power interruption.
Information on the filter indicator light and guidance for removing humidifier parts.
Steps for cleaning the water tank and descaling the humidifying filter.
How to clean the humidifying tray, cover, and back panel.
Methods for cleaning dust from filters and wiping the unit exterior.
How to clean the Plasmacluster unit and understand the replacement indicator.
Step-by-step guide for replacing the Plasmacluster ion generating unit.
Information on filter replacement timing and specific model numbers.
Instructions for properly disposing of used air filters.
Resolving issues with persistent odors, smoke, and monitor light indications.
Addressing operational problems, water level, and humidity monitor accuracy.
Guidance on correctly installing the tray panel, float, and roller components.
Troubleshooting humidity filter, fan motor, and sensor errors.
Resolving circuit board and Plasmacluster unit errors.
Details power requirements, fan speeds, and noise levels for different modes.
Includes performance, dimensions, and standby power consumption.
