E-8
OPERATION
STOP
About the Automatic Humidify Mode
The temperature and humidity sensors automatically detect
and adjust humidity according to changes in room temperature.
Depending on the size and humidity level of a room, humidity
may only reach a level of about 55~65 %. If this occurs, using the
CLEAN AIR & HUMIDIFY/MAX MODE is recommended.
CLEAN AIR & HUMIDIFY
Temperature Humidity
~18 ºC 65 %
18 ºC~24 ºC 60 %
24 ºC~ 55 %
How to use the unit to quickly clean and humidify the air and reduce odours.
• Select the fan speed you want.
(Ref. E-9)
• Unless the power cord has been
unplugged, the unit will start operation
with the most previous settings.
NOTE
• Fill the Water Tank. (Ref. E-7)
• When the Water Tank is empty, the unit operates in CLEAN AIR MODE and the light flashes
red.
START
STOP
CLEAN AIR
How to use the unit when additional humidity is not required.
• Select the fan speed you want.
(Ref. E-9)
• Unless the power cord has been
unplugged, the unit will start operation
with the most previous settings.
START
OM_KI-A60Y_EN+ID.indb Sec1:8 2/28/12 11:16:12 AM
To Next Page
Loading...
