EasyManua.ls Logo

Sharp KI-A60Y - Plasmacluster Unit Maintenance; Plasmacluster Unit Cleaning and Replacement Light

Sharp KI-A60Y
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-16
Flashing slowly
(red)
Elapsed Time Display Message
Begin use
Approx. 17,500 hours Replace the Plasmacluster
Ion Generating Unit
Approx. 19,000 hours Stop operating the front
outlet Fan
CARE AND MAINTENANCECARE AND MAINTENANCE
PLASMACLUSTER ION GENERATING UNIT (electrode section)
Clean every 6 months or more often if necessary
(When operated the unit around-the-clock.)
Remove dust attached to the electrode section of the unit with the cleaning
brush included with the unit or a commercially-available cotton applicator.
(Ref. E-17 removing the unit)
CAUTION
Connection Terminals
Unit Cleaning Brush
Electrode Section
(4 parts)
Electrode
Root of the
electrode
[ Before cleaning ]
[ After cleaning ]
UNIT REPLACING LIGHT
The Unit Replacing light will turn on after approximately 17,500 hours.
( 2 years × 24 hours = 17,500)
<REPLACEMENT Plasmacluster Ion Generating Unit>
Please consult your dealer to purchase the following model.
Model : IZ-C75SE
<Disposal>
Dispose of the old Plasmacluster ion generating unit according to local laws and regulations.
-materials-
Unit : Polystyrene terephthalate, electronic parts.
Flashing fast
(red)
Do not touch the electrode section.
Doing so can cause injury.
Do not transform the electrode section. Doing so can damage it.
Do not touch the connection terminals. Doing so can damage them.
If dust has hardened, lightly water a commercially-available cotton applicator and then
wipe off the part.
OM_KI-A60Y_EN+ID.indb Sec1:16 2/28/12 11:16:23 AM

Related product manuals