E-22
SPECIFICATIONS
Power supply 220 V 50 Hz
Fan Speed Adjustment
MAX MED LOW
CLEAN AIR
Fan Speed (m
3
/hour)
402 294 90
Rated Power (W)
53 32 6.6
Noise Level (dBA)
49 44 20
CLEAN AIR
&HUMIDIFY
Fan Speed (m
3
/hour)
402 294 132
Rated Power (W)
53 33 10
Noise Level (dBA)
49 44 26
Humidification (mL/hour)*1
730 600 300
Recommended Room Size (m
2
)*2 ~50
High density Plasmacluster ion recommended room size (m
2
)
*3
~35
Water Tank Capacity (L)
4.0
Sensors
Dust / Odour / Temperature & Humidity
Filter type
Dust collection HEPA with Microbial control *4
Deodorization Deodorizing
Cord Length (m) 2.0
Dimensions (mm)
410 (W) × 340 (D) × 684 (H)
Weight (kg) 13.0
*1 •
The amount of humidification changes in accordance with indoor and outdoor temperature and
humidity.
The amount of humidification increases as temperatures rises or humidity decreases.
The amount of humidification decreases as temperatures decrease or humidity rises.
• Measurement Conditions : 20 ºC, 30 % humidity (JEM1426)
*2 • The recommended room size is one that can be humidified when the unit's fan is operating at
the maximum speed setting.
•
R
he recommended room size is an area in which a given amount of dust particles can be
removed in 30 minutes.
*3 • Room size in which approximately 25000 ions per cubic centimeter can be measured in the
centre of the room when the unit is placed next to a wall, is running at maximum settings, and is
at a height of approximately 1.2 meters from the floor.
*4 • The filter removes more than 99.97% of particles at least 0.3-microns in size. (JEM1467)
Standby Power
When the unit's power plug is inserted in a wall outlet it consumes about 0.6 watts of standby power in
order to operate electrical circuits.
To conserve energy, unplug the power cord when the unit is not in use.
OM_KI-A60Y_EN+ID.indb Sec1:22 2/28/12 11:16:31 AM
To Next Page
Loading...
