S
Sylvia MorganSep 8, 2025
How to fix a fan motor error on my Sharp KI-A60Y?
- MmarkrichardsSep 9, 2025
To cancel a fan motor error display on your Sharp Air Cleaner, turn the power OFF, wait one minute, and then turn the power ON again.
To Next PageTo Next PageHow to fix a fan motor error on my Sharp KI-A60Y?
To cancel a fan motor error display on your Sharp Air Cleaner, turn the power OFF, wait one minute, and then turn the power ON again.
What to do if the Front Monitor lights are turned off on my Sharp Air Cleaner?
If the Front Monitor lights are turned off on your Sharp Air Cleaner, check to see if the Lights OFF Mode is selected. If it is selected, press the Lights Control Button to turn the indicator lights on.
How to fix a temperature-humidity sensor error on my Sharp Air Cleaner?
To resolve a temperature-humidity sensor error on your Sharp Air Cleaner, unplug the unit, wait one minute, then plug the unit in again.
How to fix Plasmacluster Ion Generating Unit error on my Sharp KI-A60Y?
To resolve a Plasmacluster Ion Generating Unit error on your Sharp Air Cleaner, make sure that the Plasmacluster Ion Generating Unit is correctly installed. Remove the unit, and then fully reinsert it and press the Operation Button.
How to fix Low Plasmacluster Ion level on my Sharp KI-A60Y?
To address a low Plasmacluster Ion level on your Sharp Air Cleaner, clean the electrode section of the unit and Front Pre-filter.
General| Brand | Sharp |
|---|---|
| Model | KI-A60Y |
| Category | Air Cleaner |
| Language | English |
Explains the Plasmacluster and High-Density 25000 ion technology used in the air purifier.
Details the Pre-Filter, Deodorizing Filter, and HEPA Filter functionality.
Highlights dust trapping, odor reduction, pollen removal, and air freshening.
Describes humidifying function, capacity, and automatic air quality adjustment.
Covers precautions for electrical shock, fire, and proper unit operation.
Advises on operating environments, cleaning, water hygiene, and radio interference.
Details operational restrictions, handling, and filter care warnings.
Specifies placement guidelines for optimal performance and safety.
Identifies external and internal parts of the air purifier unit.
Explains the functions of buttons and indicator lights on the main display.
Details the indicators for air purity, humidity, and water levels.
Step-by-step guide for correctly installing the HEPA and Deodorizing filters.
Advises on safe removal, filling, and installation of the water tank.
Instructions for operating the unit to clean and humidify air simultaneously.
Guide for using the unit when only air purification is needed.
Details the operation of the 60-minute intensive air purification mode.
Explains fan speed settings and how to control Plasmacluster ion function.
How to adjust display brightness, enable child lock, and set sound alerts.
Procedure to adjust dust and odor sensor sensitivity levels.
How to toggle display indicators and set the automatic shut-off timer.
Details how the unit resumes operation after power interruption.
Information on the filter indicator light and guidance for removing humidifier parts.
Steps for cleaning the water tank and descaling the humidifying filter.
How to clean the humidifying tray, cover, and back panel.
Methods for cleaning dust from filters and wiping the unit exterior.
How to clean the Plasmacluster unit and understand the replacement indicator.
Step-by-step guide for replacing the Plasmacluster ion generating unit.
Information on filter replacement timing and specific model numbers.
Instructions for properly disposing of used air filters.
Resolving issues with persistent odors, smoke, and monitor light indications.
Addressing operational problems, water level, and humidity monitor accuracy.
Guidance on correctly installing the tray panel, float, and roller components.
Troubleshooting humidity filter, fan motor, and sensor errors.
Resolving circuit board and Plasmacluster unit errors.
Details power requirements, fan speeds, and noise levels for different modes.
Includes performance, dimensions, and standby power consumption.
