REPLACING METHOD FOR MAIN PARTS
12
REMOVE OF CORD REEL ASS’Y
1. Remove the 4 screws fixing the body. (Fig. 2.)
2. Remove the body from the panel ring.
3. Remove the cord reel from the body, and disconnect lead wire from the cord reel.
4. Now the cord reel is free.
The method of removing these wires is shown.
REMOVE OF BODY
1. Turn the rice cooker upside down and remove the 4 screws fixing the body.
2. Remove the body from the panel ring.
3. Remove the cord reel from the body.
4. Remove the nut holding lead wire earth with the body.
5. Now the body is free.
Fig. 2.
Screw
Body
REMOVE OF LID ASS’Y
1. Remove the body in accordance with “REMOVE OF BODY”.
2. Disconnect lead wire from PCB ass’y and remove the screw holding lead wire earth from outer pot.
Screw
Outer pot
With this claw being
pressed inward
PCB ass’y
Inner lid lead wire connector
Fig. 3.
Fig. 1.
To Next Page
Loading...
