25
LC-13AV6U
2. How to exit Public Mode
There are the following ways to quit the public mode setup screen.
» Turn off "PUBLIC MODE" in the adjustment process mode. (✩) ← This way alone is not for quitting the setup
screen, but for quitting the mode itself.
» Turn off the power with the "POWER" key. (★)
» Select "ENTER". (★)
» Move the cursor to "RESET" and press the "FLASHBACK" key. (Back to the normal mode screen)(✩)
★ ... "PUBLIC MODE" stays on in the adjustment process mode.
✩ ... The settings will be back to the factory ones.
3. Public Mode Setting Values
» With the factory settings made, the public mode settings get initialized. (The adjustment process remains intact.)
4. Public Mode Menu
The guidance is not displayed onscreen.
Setup procedure
» To move the cursor up and down, use the "cursor UP/DOWN" key (remote controller) and "CH (ù)/(Ù)" key
(remote controller and set).
» To change the settings, use the "cursor RIGHT/LEFT" key (remote controller) and "VOL (+)/(–)" key (remote
controller and set).
» To save new settings, keep the cursor at "Enter" and use the "cursor RIGHT/LEFT" key (remote controller) and
"VOL (+)/(–)" key (remote controller and set).
PUBLIC MODE
MAXIMUM VOLUME [ 60 ]
VOLUME FIXED [VARIABLE ]
VOLUME FIXED LEVEL [ 20 ]
RC BUTTON [RESPOND ]
PANEL BUTTON [RESPOND ]
MENU BUTTON [RESPOND ]
ON SCREEN DISPLAY [YES ]
INPUT MODE START [NORMAL ]
INPUT MODE FIXED [VARIABLE ]
RESET
ENTER
To Next Page
Loading...
Need help?
General