To Next PageTo Next Page
Need help?Do you have a question about the Sharp LC-13SH3U and is the answer not in the manual?
General| Screen Size | 13 inches |
|---|---|
| Display Technology | LCD |
| Aspect Ratio | 4:3 |
| Brightness | 430 cd/m² |
| Response Time | 16 ms |
| HDMI Ports | 0 |
| USB Ports | 0 |
| Inputs | Composite, S-Video |
| Resolution | 640 x 480 |
Essential safety warnings for technicians and users concerning modifications and power disconnection.
Procedures to perform before returning the receiver to the user, focusing on fire and shock hazards.
Information on safety-related components and the importance of using identical replacement parts.
Guidance on the model's use of lead-free solder and its identification.
Best practices and recommendations for using lead-free wire solder.
Techniques and precautions for successful lead-free soldering.
Identification of controls, terminals, and components on the main unit.
Explanation of power and sleep timer indicators on the main unit.
Instructions for headphone use and cable management.
Identification of buttons and features on the remote control.
Steps for installing batteries and guidelines for remote control usage.
Initial setup steps for calibrating the TV.
Methods to enter the checker and adjustment process modes.
How to navigate menus and adjust settings during calibration.
Procedure to display test patterns for screen adjustment.
Overview of the 22 types of test patterns available for display.
Methods to access the public mode setup screen.
Procedure for entering the 3-digit password to verify public mode access.
Configuration options for the maximum adjustable volume.
Options to fix or vary the sound volume output.
Setting the specific volume level when 'Volume Fixed' is selected.
Configuration of remote control button functionality in public mode.
Detailed listing of pins and their functions for IC2003.
Guidelines for measuring circuit voltages under specific conditions.
Explanation of symbols and notations used for resistors and capacitors.
Crucial safety warnings for schematic interpretation and component replacement.
PWB layout for the operation unit, showing wiring side components.
PWB layout for the operation unit, showing chip parts side components.
PWB layout for the R/C, LED unit, showing wiring side components.
PWB layout for the R/C, LED unit, showing chip parts side components.
Instructions on how to order replacement parts, including required information.
List of PWBs supplied as complete assemblies, not as individual parts.
List of integrated circuits used in the unit, with part numbers and descriptions.
List of transistors used in the unit, with part numbers and descriptions.
List of diodes used in the unit, with part numbers and descriptions.
List of crystals used in the unit, with part numbers and descriptions.
List of mechanical parts and their locations for the operation unit.
List of mechanical parts and their locations for the R/C, LED unit.
List of mechanical parts and their locations for the sub unit.
List of mechanical parts and their locations for the main unit.
