27
LC-13AV6U
(5) PANEL BUTTON
(6) MENU BUTTON
(7) ON SCREEN DISPLAY
Selection
Default
Explanation
Limit in Setting
Exception
Remarks
Selection between
"Respond" and "No respond" (loop provide)
Respond
All the operations by keys (except the power key) of the unit can be invalidated.
» Inspection mode and public menu mode can be started irrespective of setting.
» All the keys can be used in adjustment process, inspection mode and public menu irrespective of setting.
» In U.S.A model, all the keys can be used also in the initial EZ-Setup after power-ON irrespective of
setting.
Selection
Default
Explanation
Limit in Setting
Exception
Remarks
Selection between
"Respond" and "No respond" (loop provide)
Respond
In
"No respond" setting, the menu operation by the menu key of the remote control and the menu key of the
unit are invalidated.
» The following keys become invalid.
All of the direct change keys to menu display
» Inspection mode and public menu mode can be started irrespective of setting.
» All the keys can be used in adjustment process, inspection mode and public menu irrespective of setting.
» All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
Selection
Default
Explanation
Limit in Setting
Others
Exception
Remarks
Selection between "Yes" and "Limited" (loop provide)
Yes
The following OSD displays are made ineffective.
Displays of menu group, channel call, sound volume bar and direct key call
» Set time of the SLEEP TIMER is cleared.
» Setting of the no-signal power-OFF (AUTO POWER OFF) is cleared to "OFF".
» Setting of the no-operation power-OFF is cleared to "OFF".
» Keys falling under any of the following items become invalid.
1Appearance of screen changes and the sound changes.
2Personal functions which are hard to restore.
Ex.) Screen display, menu, OFF-timer, ON-timer, AV MODE, screen size switching, treble emphasis, AUDIO
ONLY, sound changeover, LANGUAGE, CLOSED CAPTION
» Simple input switching is generated. Those which are restored soon after leaving as they are and may be
requested for change by customer are not prohibited.
Ex.) Brightness sensor (BACKLIGHT) and PIC. FLIP
» Such a caution which is displayed independently is displayed as it is.
Non-responding signal caution, V-Chip caution and power-ON fixing caution
» In "No" setting, the setting of "SOUND ONLY MODE" is changed to "OFF" and selecting operation is
made prohibited.
» When CC has already been ON, CLOSED CAPTION is displayed.
To Next Page
Loading...
Need help?
General