Sharp LC-19A33X-BK

36
Settings when using external devices
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Colour System”, and
then press ENTER.
3
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press
ENTER.
4
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
AUTO
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
Colour system settings
19A33X_en_f.indd 3619A33X_en_f.indd 36 2007/07/23 18:24:362007/07/23 18:24:36